qizhen0926
Guest
|
 |
In the increasingly take the heat to warm the floo
« on: Jan 13th, 2016, 4:03am » |
 Quote  Modify
 Remove
|
Electric heating, is the outer surface of the upper limit of permissible operating temperature of 65 �� heating cables buried under the floor, as the heat source to the heating cable floor,corrosion-resistant exterior wood plastic with thermostat control room or floor temperature to achieve the floor radiant heating heating mode. Plumbing, electricity use relatively warm Plumbing, plumbing pipes must be continuously applied to a large area of ??contiguous area use. Under normal circumstances, the heating season comes, plumbing first start, the whole heating process takes several hours, change a deck to a floor the second start also takes the role of one hour, heating rate somewhat time-consuming. Plumbing and heating also subject to size, whether there is high-level and other factors using a pump.
Plumbing also need to use the boiler, the relatively high initial installation cost, lower operating costs, but maintenance costs are high, manifolds, fittings, valves,honeycomb panel australia panel thermostats and other components are wearing parts, the pipeline needs to the accumulation of scale regular cleaning. And these components have life, quality varies, most around 10 years should be replaced. Water circulating in the water, the ground coil without connector, there is no risk of leakage, better safety performance. Electric heating, and some people would consider to be no more than a circuit load, but experts say that as long as the normal use of air conditioning in the room, the circuit can withstand the electric heating power.
|
Sponsored by: The Fans!
Home
Help
Search
Members
Chat
Member Map
Login
Register
Reply
Add Poll
Notify of replies
Send Topic
Print