qizhen0926
Guest
|
 |
Wood flooring Used flooring coup 2
« on: Jan 20th, 2016, 3:34am » |
 Quote  Modify
 Remove
|
<p>Used how do you clean composite garage advantages: First, use a long time the old floor, performance is more stable, basically there is no contamination; the second is the price of second-hand wooden floors higher and higher, if you choose to replace the whole case will cause great waste, meaning a further sum not a small expenditure. Used wood floor that is floor renovation. First, make sure the house clean, move out of the house all the items, the original second-hand wooden floor surface polished off 1 to 2 mm, polished from 40 mesh, 80 mesh, 120 mesh sandpaper gradually polished, so as to ensure that the surface of the floor delicate, smooth . After sanding, be putty, paint, painting, waxing and polishing. Use wood putty mixed with the floor, you can ensure the true nature of second-hand wooden floors, the floor will not be scraped wood flooring that is spent. Painted This step is critical, general paint brush again, twice finish, the floor surface there are defects encountered situations need a primer brush a few times.</p>
<p>Floor paint should use environmentally friendly water-based composite ground level deck specifications paint, will not make the room smell, floor paint must be dedicated floor paint, wear resistance in order to achieve second-hand wooden flooring requirements. The frequency used by second-hand wooden floor, the general use of 5 years from the wood floor will be prone to paint, paint chips and other issues, which need to be refurbished wooden floor. But if the old floor can be renovated depends on the type of floor surface layer thickness and the floor. Because of second-hand wooden floor renovation must be worn surface 1W64; thickness 2 mm, so that the surface layer is thick enough to wear through the renovation will result in failure.</p>
<p>Most products surface layer thickness of ordinary second-hand wooden floors and three-layer parquet is about 4 millimeters, it is generally suitable second-hand wooden floor renovation. Laminate flooring surface with a layer of aluminum oxide wear layer, refurbished floor will undermine its wear layer, increasing the floor aging. Surface layer thickness ranging from second-hand pvc wood decking in the philippines, the thickness of the crust is generally about 0.6W64; 1 mm, thickness of the surface like this can not be refurbished, while the thick of it can be renovated. If a large area of ??the old floor deformation and cracking, and the emergence of moldy, even if the renovation are very difficult to repair to the original look, as in this case generally require replacement of the wooden floor.</p>
|
Sponsored by: The Fans!
Home
Help
Search
Members
Chat
Member Map
Login
Register
Reply
Add Poll
Notify of replies
Send Topic
Print