qizhen0926
Guest
|
Floor was blisters, this phenomenon is not common, but it is the consumer's toughest floor problems. So, how do encounter soaked floor? Now, Chinese wood floor network Xiaobian to explain the four kinds of solutions that soaked the floor, hoping to help!
Option One: the wooden floor pry a "well" type stacked dry
Applicable conditions: soaked floor after prying
Treatment: Waterproof Wood Planks Over Concrete Patio, in the case of non-deformable try to keep the floor dry crucial. After the floor surface water can dry, press the "well" type superimposed display, to prevent the occurrence of deformation produced by the weight of its laminated in place to pay attention to the floor when the reverse side up to prevent surface due to rapid drying caused dry, while careful not to put the sun exposure, it should be placed in ventilated place to dry, under normal circumstances can be used again for better quality in terms of solid wood and multilayer wood. In addition, water leakage should occur at the first time notification service at the floor, the floor staff will combine their own conditions to the owners to provide the best solution.
Option Two: Remove the baseboard
Applicable conditions: Laminate flooring soaked
Treatment: no matter how large or small area of ​​water soaked area, Mr. Liu is not recommended to strengthen the floor pry dry, so easy to damage laminate flooring, it is likely to cause serious consequences can not be used again. The best floor surface water quickly drained, and best composite doors, exposed joints, expansion joints against water vapor distributing finished, but depending on the amount of water the size of the dried up usually takes about seven to fifteen days, for quality Or better soaking time is not long self-healing products, if fifteen days later still not recovered should consider re replaced.
Option Three: one side leakage, both sides pry ventilation
To adapt to conditions: plus keel, a small area of ​​flooding wood flooring
Treatment: a small area to detect the water, can be ground handling clean, pry the board will be re-installed after a wet floor to dry; if slightly into the water, not only to pry the board leaks, but also should be set up along the keel row direction across the board will also pry away moisture so that the internal air circulation. If you can not determine the size of the amount of water, preferably by the flow of water in turn to pry the board, view humid conditions, foolproof.
Scenario four: with high-power vacuum suction
To adapt to conditions: a straight paved the way small area of ​​water of solid wood flooring
Treatment: If the water phenomenon in a very short time to discover, the available power of the vacuum cleaner to suck out moisture. However, if a large area of ​​water necessary to south africa pvc panel manufacture, according to a second program dry. And if indoor moisture is large, if the conditions can be installed dehumidifiers in the room, in a short time the indoor moisture drained, but this operation programs need to have the floor dry recognition technology.
|
Sponsored by: The Fans!
Home
Help
Search
Members
Chat
Member Map
Login
Register
Reply
Add Poll
Notify of replies
Send Topic
Print