qizhen0926
Guest
|
 |
Avoid laying four kinds of error method
« on: Feb 29th, 2016, 8:38pm » |
 Quote  Modify
 Remove
|
Solid wood flooring laid process is very particular, laying improper give families a lot of trouble, Xiao Bian finishing laying of some improper way we shop when we must avoid these problems Oh!
According to relevant statistics show that solid wood flooring appear in the actual use of the problem, more than half is due to improper laying, only 5% were related to the quality of the floor itself. Visible, the laying process is reasonable or not is the most important factor affecting the effect of the floor. Experts advise that you should avoid the following mistakes laying method.
1, the ground uneven: uneven ground cause some vacant floors and keel will beep when the stampede.
2, keel without drying: unseasoned wood keel moisture content is usually around 25%, and eligible wooden floor moisture content is generally 12% humidity difference over the General Assembly to make wooden floor quickly absorb moisture, causing the floor bagging, paint surface burst. First laid out during the construction of the floor, and then the other construction on the floor, which is now common practice in the renovation team. But this, after the flooring laid, often need to go through a month or even longer to polish painted. During the floor and ambient moisture, chemicals did not make any quarantine measures, it is likely to lead to wood moisture content due to drastic changes in deformation and cracking.
3, assembly too loose or too tight: Parquet with changes in temperature and humidity, there will be expansion or shrinkage. Therefore, when laying the floor, the level should be reasonable arrangements for assembling the tightness of the wooden floor based on the use of environmental temperature and humidity place. If too loose, there will be a greater contraction of the floor cracks, too tight, it will inflate the floor when bagging.
4, with a dozen wedge plus nails fixation: construction nails used to play wedge plus a fixed manner, will cause the wedge with nails because the contact surface is too small nail leaving less grip force, can easily result in wood keel loose, there will be sound when walked on the floor
all link:
composite swimming pool deck
composite wall panel
Cheapest Wpc Decking
|
Sponsored by: The Fans!
Home
Help
Search
Members
Chat
Member Map
Login
Register
Reply
Add Poll
Notify of replies
Send Topic
Print